Abstract submission deadline: 30th June 2020
Full chapters due: 31st December 2020
The Brundtland Report (WCED, 1987) defined sustainable development as; “development that meet the needs of the present without compromising the ability of future generations to meet their own needs” (p. 43). Its underlying assumption is that the world’s physical resources are not finite; therefore, they have to be managed responsibly to sustain future generations (Camilleri, 2018a; Camilleri, 2014). Subsequently, the United Nations (UN) Conference on Environment and Development has put forward Agenda 21 that dedicated a chapter that was focused on unsustainable patterns of production and consumption. This document recommended that the UN’s member states ought to intensify their efforts to reduce the use of scarce resources during production processes, whilst minimising the environmental impacts from the generation of waste and pollution (Camilleri, 2018a; Camilleri, 2014; Agenda 21, 1992).
In 2002, the UN Report of the World Summit on Sustainable Development also made reference to unsustainable patterns of production and consumption. The UN’s member states were urged to manage their natural resources in a sustainable manner and with lower negative environmental impacts; by promoting the conservation and sustainable use of biodiversity and ecosystems, whilst reducing waste (WSSD, 2002, p. 13). Moreover, in another resolution, entitled; “The future we want,” the General Assembly at the UN Conference on Sustainable Development has reaffirmed its commitment to implementing green economy policies in the context of sustainable development. The heads of state and government or their representatives have agreed to continue promoting the integrated and sustainable management of ecosystems, whilst facilitating their conservation, regeneration, and restoration of resources (UNCSD, 2012). Furthermore, during the UN’s General Assembly Resolution of September 25 2015 entitled “Transforming our world: the 2030 Agenda for Sustainable Development,” the world leaders have agreed to adopt the Sustainable Development Goals that replaced the previous millennium development goals that were established in the year 2000. Specifically, the Sustainable Development Goal 12 of the 2030 agenda, namely, “Sustainable Consumption and Production” explained that there is an opportunity for business and industry to reap economic gains through resource and energy efficiencies. It also raised awareness on the use of sustainable infrastructures and urged the UN member states to address air, water, and soil pollution to minimise their environmental impact (UNDP, 2015). Moreover, the Paris Climate Agreement (COP 21) and Resolutions 1/5 and 2/7 on chemicals and waste, and 2/8 on sustainable production and consumption, as adopted by the first and second sessions of the United Nations Environment Assembly (that was held in Nairobi, Kenya, on the June 27, 2014 and the May 27, 2016), are also considered as important policy instruments for many stakeholders, as they have paved the way for the transition towards the CE strategy.
These intergovernmental policy recommendations on sustainable consumption and production have led to increased regulatory pressures on business and industry towards controlled operations management and environmentally responsible practices.
Relevant theoretical underpinnings reported that the circular economy reduces the reliance on resource extraction and raw materials (Camilleri, 2018b; Camilleri, 2017; Cooper, 1999). Therefore, it restores any damage in resource acquisition by ensuring that little waste is generated throughout the production process and during the products’ life. Liu, Li, Zuo, Zhang, and Wang (2009) explained that the circular economy aims at minimising the generation of waste, as it involves environmental conservation. Similarly, Su, Heshmati, Geng, and Yu (2013) contended that the circular economy strategy involves efficiency‐oriented control systems at all stages of production, distribution, and consumption of materials. They made reference to energy efficiency and water conservation, land management, and soil protection, among other issues. Hence, the circular economy model can lead to resource and energy efficiencies as well as economic development.
In this light, the publisher is calling for theoretical and empirical contributions that are focused on the sustainable production and consumption of resources, materials and products. Therefore, the readers of this publication will be in a better position to understand the operations and strategies in manufacturing industries as well as in closed loop and product-service systems (Camilleri, 2018a). This special issue will include but is not limited to the following topics:
- Alternative consumption patterns;
- Assessment and Reporting;
- Clean production;
- Circular economy;
- Circular economy business models;
- Circular economy product designs;
- Climate change;
- Climate change policy and adaptation;
- Closed loop systems;
- Corporate social responsibility;
- Corporate sustainability,
- Eco-industrial parks;
- Ecological management and natural capital;
- Education for sustainability;
- Emissions reduction;
- Energy efficiency;
- Energy policy;
- Energy use and consumption;
- Environmental assessment;
- Environmental behavior;
- Environmental economics;
- Environmental management;
- Environmental policy;
- Environmental protection;
- Environmental sustainability;
- Extended producer responsibility;
- Footprints and other assessment types;
- Green/sustainable engineering;
- Green/sustainable supply chains;
- Industrial, agricultural and supply chains;
- Industrial ecology;
- Life cycle assessment;
- Pollution reduction;
- Product-service systems;
- Recycling Resources;
- Regional sustainability;
- Renewable energy;
- Renewable resource;
- Resource and energy use;
- Resource Efficiency;
- Sustainable consumption;
- Sustainable production;
- Sustainable tourism;
- Urban and regional sustainability;
- Water conservation;
- Waste management;
- Waste minimization;
Academics and researchers are invited to submit a 300-word abstract before the 30th June 2020. Submissions should be sent to Mark.A.Camilleri@um.edu.mt. Authors will be notified about the editorial decision during July 2020. The accepted chapters should be submitted before the 31st December 2020. The length of the chapters should be around 7,000 words (including references, figures and tables). The references should be presented in APA style (Version 6). All submitted chapters will be critically reviewed on a double-blind review basis. All authors will be requested to serve as reviewers for this book. They will receive a notification of acceptance, rejection or suggested modifications –before the 25th February 2021.
Note: There are no submission or acceptance fees for the publication of the book chapters. All abstracts / proposals should be submitted via the editor’s email.
Prof. Dr. Mark Anthony Camilleri (Ph.D. Edinburgh)
Department of Corporate Communication,
Faculty of Media and Knowledge Sciences,
University of Malta, MALTA.
Following the double-blind peer review process, the full chapters will be submitted to Emerald for final review. For additional information regarding the publisher, please visit https://www.emerald.com/insight/. This prospective publication will be released in 2021.
Agenda 21.1992. United Nations Conference on Environment & Development. Rio de Janerio, Brazil, 3 to 14 June 1992. United Nations Sustainable Development. https://sustainabledevelopment.un.org/content/documents/Agenda21.pdf.
Camilleri, M. (2014). Advancing the sustainable tourism agenda through strategic CSR perspectives. Tourism Planning & Development, 11(1), 42-56.
Camilleri, M. A. (2017). Closing the Loop of the Circular Economy for Corporate Sustainability and Responsibility. In Corporate Sustainability, Social Responsibility and Environmental Management (pp. 175-190). Springer, Cham.
Camilleri, M. A. (2018a). The circular economy’s closed loop and product service systems for sustainable development: A review and appraisal. Sustainable Development, 27(3), 530-536.
Camilleri, M. A. (2018b). Closing the loop for resource efficiency, sustainable consumption and production: A critical review of the circular economy. International Journal of Sustainable Development.21(1-4), 1-17.
Cooper, T. (1999). Creating an economic infrastructure for sustainable product design. Journal of Sustainable Product Design, 8, 7– 17.
Liu, Q., Li, H. M., Zuo, X. L., Zhang, F. F., & Wang, L. (2009). A survey and analysis on public awareness and performance for promoting circular economy in China: A case study from Tianjin. Journal of Cleaner Production, 17, 265– 270. https://doi.org/10.1016/j.jclepro.2008.06.003
Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013). A review of the circular economy in China: Moving from rhetoric to implementation. Journal of Cleaner Production, 42, 215– 227. https://doi.org/10.1016/j.jclepro.2012.11.020
UNCSD (2012). Future we want—Outcome document. Resolution adopted by the General Assembly on 27 July 2012. United Nations General Assembly. http://www.un.org/ga/search/view_doc.asp?symbol=A/RES/66/288&Lang=E.
UNDP (2015). Transforming our world. Resolution adopted by the General Assembly on 25 September 2015 http://www.un.org/en/development/desa/population/migration/generalassembly/docs/globalcompact/A_RES_70_1_E.pdf.
WCED (1987). Our common future. In World commission on environment and development. Oxford, U.K: Oxford University press.
WSSD (2002). United Nations report of the world summit on sustainable development. Johannesburg, South Africa, 26 August‐ 4 September 2002. http://www.un‐documents.net/aconf199‐20.pdf.